• Material Handling Banner Application
  • Material Handling Banner
  • Magnetek Material Handling Flex Mini MBT
  • Magnetek Energy Engineered
  • Magnetek Material Handling Collision Avoidance
  • Magnetek Material Handling Flex Mini
Flex EX2 Series
  • FLEX EX 2 Radio Controller Group
  • FLEX EX 2 Radio Controller
  • FLEX EX 2 Radio Receiver
  • Magnetek FLEX EX2 Diagram
  • Magnetek FLEX EX2 Diagram
  • Magnetek FLEX EX2 Diagram

Flex EX2 Is Now Available In EMEA

The Flex EX2 series of wireless controls offer even more features and greater performance than our first generation Flex EX radios at the same great value. These durable, rugged, and feature-rich radios are ideal for use in material handling, overhead crane, and industrial applications. Flex EX2 transmitters are ergonomic and lightweight, and are available in 4, 6, 8, and 12 button style options to meet all your application needs.

Innovative and Efficient Performance 
  • Advanced microprocessor controls with 32 bit CRC and Hamming Code provide ultra-fast, safe, precise and error-free encoding and decoding 
  • Equipped with more than 200 programmable functions to suit all types of applications 
  • Drop detection capability identifies an accidental transmitter drop, ceasing all operation, preventing unintended equipment motion and enhancing system safety

Ergonomic and Reliable Design
  • Rounded transmitter enclosures made from industrial-strength nylon and fiberglass composite materials combine comfort with durability 
  • Pushbuttons feature gold-plated contacts and are rated for more than one million press cycles. The defined snap-action steps provide positive tactile feedback even while wearing gloves 
  • Labels located next to buttons for easy visibility and durability
  • IP66 rated, fully sealed transmitter and receiver enclosures provide you with confidence and protection in the harshest indoor or outdoor environments 
  • Two “AA” alkaline batteries provide more than 100 hours of operation 
  • Charging cradle available for easy recharge 
  • A wide variety of accessories is available to provide additional protection and flexibility, including protective rubber transmitter boots, padded nylon transmitter case, retractable belt clip, and horn kit 
  • Battery compartment with single thumbscrew provides easy access to batteries, dipswitches, and programming port

Secure and Dependable Communications
  • Frequency agility feature automatically switches channels when interference is detected on a channel 
  • Built-in infrared allows for transmitter configuration with the IR Programmer, so transmitter unit doesn’t need to be opened up to configure 
  • Advanced synthesized RF controls with 124 channels add flexibility to frequency management in the field 
    • 62 channels are user-programmable 
  • Each Flex EX2 system has over one million unique identification codes (20 Bit) and never repeats 
  • Spare and replacement transmitters can be paired wirelessly from transmitter to transmitter or receiver to transmitter 
  • Flex EX2 transmitters are backwards compatible with first generation EX receivers

Specialty Models

Flex EX2 radios are available with special operational functions to provide even more control options.

A/B Selector Switch (AB)

A three-position selector switch allows one operator to switch operation between two trolley/hoists (A, B, or Both) that are located on a single bridge. The operator can easily identify which trolley hoist is active on the crane by the position of the selector switch (Available on 8- and 12-button models).

Tandem Operation (T)

This system allows two operators to control two bridge cranes or trolley/hoists independently or simultaneously with the three position selector switch. One operator can maximize the capabilities and lifting power of two bridge cranes or both users can operate each bridge crane independently (Available on 8- and 12-button models).

Receiver Select Operation (RS)

The system allows one operator to select multiple receiver units at one time, so one operator can control up to 2 bridges and 4 trolley/hoists simultaneously or independently. This simplifies installation by eliminating control festooning between the bridge and trolley/hoists and freeing up the trolley/hoist to run from one bridge to the next. (Available on 8- and 12-button models).

Special Configurations Available in EMEA Only

MRX Receiver
MRX Receiver

Certain features of the Flex EX2 are enabled when 4 or 6-button transmitters are paired with the space-saving MRX receiver. MRX can be mounted on the control panel or the body of a hoist to minimize the potential for imbalance. The receiver is ideal for basic or lightweight applications, such as chain hoists.

  • Voltage Select feature automatically adapts to the control voltage from three available power supplies: 9-36 VDC, 24-48 VAC, and 48-240 VAC
  • Dimensions: 120 mm (L) x 90 mm (W) x 55 mm (H)
  • Weight: 900 kg/2.0 lb (including output cable)

Flex EX2 Receiver

Flex EX2 Receivers

Full features are enabled when the 4, 6, 8, or 12-button transmitters are paired with the EX2 receiver. The Flex EX2 receiver offers more control capabilities and options suitable for overhead cranes, for functions such as lights, or powered lifting devices. All components are easily accessible and field replaceable.

  • 4/6 Dimensions: 196 mm (L) x 149 mm (W) x 85 mm (H)
  • 4/6 Weight: 1.76 kg/3.8 lb (including output cable)
  • 8/12 Dimensions: 260 mm (L) x 204 mm (W) x 83 mm (H)
  • 8/12 Weight: 3.15 kg/6.9 lb (including output cable)

CE Logo



 

©2019 Magnetek Terms and Conditions